If you have had a motherboard for a long time, it may become damaged or incapable of keeping up with newer components. Otherwise, changing motherboards is only necessary if you wish to purposefully enhance your system and install a top motherboard. Another incentive to learn how to swap a motherboard is if you’re new to PC construction and want to get the feel of it before turning it into a hobby. Furthermore, you can purchase various rtx motherboards from websites such as final desktop.
Equipment you may need
Gather all of your equipment and create an unobstructed, well-lit, and solid workstation before replacing a motherboard. You will also need some cable ties and precision screwdrivers. It’s also a good idea to use a grounding wristband and a grounding mat if you have them. Computer components, such as motherboards and CPUs, can be permanently damaged by electrostatic discharge. You can safeguard any electronic components from ESD by using grounding alternatives.
Step 1
One of the most essential as well as foremost step in replacing your motherboard is removing your old motherboard and now it is time to install a new one. Here’s how to assemble your new motherboard. Loosen and remove the panel thumbscrews which are one the side, as well as side panel, to open the case. Depending on the case that you have, if it is new or old, you will have to move accordingly. if the case is old then, you will have to move any wiring such as power supply cables and if the casing is new then, you will have to remove everything that is inside the case. In short, it is quite essential for every wire to be removed.
Step 2
Install the stand-offs in all the 4 corners, taking into account the motherboard’s dimensions. Stand-offs should be evenly distributed in the centre according to the installation place of the motherboard. It is very important to Install stand-offs that are enough in order to keep the motherboard in place as well as keep it from crashing against the case’s sides.
Step 3
Another essential to step for replacing your own motherboard is installing the cooler. Use the included brackets to install the cooler according to the manufacturer’s instructions. Double-check that all plastic from your components has been removed, including the bottom of your CPU fan.
Step 4
Carefully slide the motherboard in the chassis, making that the panel in the back becomes straight as well as screw holes line up with stand-offs. Then, it is quite essential to secure the motherboard with necessary screws using a screwdriver. 24-pin as well as 8-pin connectors, as well as the power connections, must be connected in.
Step 5
Connect the case controls to the relevant headers. Install whatever extra hardware, that you have on hand including but not limited to graphic cards and hard discs. Install the case fans as well as connect the wires to an appropriate fan header.
